Spacer biltema

Spacere, 2 stk. – Biltema.no

Spacers, 2 pcs. Description. Made of aluminium. For track gauge widening when fitting aluminium rims. 4/5 bolt universal. Not approved for road traffic use …

Av aluminium. For å øke sporvidden ved montering av lettmetallfelger. 4/5 bolt universell. Ikke godkjent for kjøring på vei i Finland!

Spacers, 2 pcs – Biltema.no

Made of aluminium. For track gauge widening when fitting aluminium rims. 4/5 bolt universal. Not approved for road traffic use in Finland!

Leveller/spacer – Biltema.no

84-382 Leveller/Spacer: Part of a simple levelling system used when laying tiles to achieve a perfectly even floor surface without level differences between the tiles, which prevents unlevel joints. Can be used for both floors and walls. Can be quickly and easily fitted without tools. The system contains three parts: 84-380 Level Screw, 84-381 Level Nut, and 84-382 Leveller/Spacer. Can be reused. Made of PP. 100 screws per pack. Assembly: 1. Place the level screw foot directly under the tile. 2. Place the Leveller/Spacer over the Level Screw. It protects the tile surface when the Level Nut is tightened and helps with levelling. 3. Screw in the Level Nut fully and tighten by hand until it is level between the tiles. 4. When the tile adhesive has dried completely, the upper sections of the Level Screw and the Level Nut can be easily removed by kicking the nut from the side or hitting it with a rubber mallet. The level screw divides at the bottom and only the foot of the screw remains under the tile. Both the nut and washer can be reused.

Spacer Block, 2 pcs – Biltema.no

Spacer Block, 2 pcs

Hjulbolt, M14 x 1,50 – Biltema.no

Forkrommet. OBS! Det anbefales ikke å bruke muttertrekkeren på forkrommede muttere.

Shims, 1-5 mm, 50-pack – Biltema.no

Flexible blocks for smaller adaptations and framing.

Hjulmuttere, 10 stk. – Biltema.no

Forkrommet. OBS! Det anbefales ikke å bruke muttertrekkeren på forkrommede muttere.

Gummimellomlegg, 6 stk. – Biltema.no

Til spiralfjærer. For å unngå nedheng når fjærene begynner å bli slitne. Vi anbefaler å montere tre stykker i hver spiralfjær.

Cross spacer 4-pack – Biltema.no

A useful tool for creating the desired spacing between the decking boards when building a wooden deck. To achieve a neat end result, use the cross spacer at both ends of the decking board to ensure that all boards are parallel. The cross shape prevents it from falling between the boards. The cross spacer has spacing sizes for 3, 4, 5 and 6 mm.